논문

<국제논문>

38. M.H. Kim, H.-S. Lee, D.-H. Seo, S.J. Cho, E.-c. Jeon, H.R. Moon, "Melt-quenched carboxylate metal–organic framework glasses", Nature Communications, (2024)

37. J.-Y. Kwak, J.-Y. Jeong, Y.-P. Kwon, D.-H. Seo, C.-M. Kang, D.-H Kim, J.S. Han, E-J Gwak, D.-S Choi, J.Y. Kim, T.-J. Je, E.-c. Jeon, "Manufacturing of stretchable substrate with biaxial strain control for highly-efficient stretchable solar cells and displays.", Scientific Reports 13.1 (2023).

36. J.S. Han, H.j. Park, J.-Y. Jeong, J.k. Jung, E.-J. Gwak, E.-c. Jeon, T.-J. Je, J.H. Shin, D.-S. Choi, "Ultrawide meta-film replication process for the mass production of a flexible microwave absorbing meta-surface", Optics Express, (2022).

35. S.-H. Kim, G.-S. Hwang, D.w. Koo, D.-H. Seo, Y.-P. Kwon, H.s. Lee, H.s. Park, E.-c. Jeon, J.-Y. Kim, "Highly impermeable and flexible silica encapsulation films synthesized by sol-gel process", Nano Research, (2022).

34. H.-J. Choi, C.s. Cho, S.w. Woo, J.-Y. Lee, Y.-E. Yoo, M.w. Jeon, G.-H. Kim, T.-J. Je, E.-c. Jeon*, "Manufacturing of Compound Parabolic Concentrator Devices Using an Ultra-fine Planing Method for Enhancing Efficiency of a Solar Cell", International Journal of Precision Engineering and Manufacturing-Green Technology, (2021).

33. J.-Y. Jeong, J.-R. Lee, H.j. Park, J.k. Jung, D.-S. Choi, E.-c. Jeon, J.h. Shin, J.S. Han, T.-J. Je, "Fabrication and characterization of resistive double square loop arrays for ultra-wide bandwidth microwave absorption", Scientific Reports, (2021).

32. G.j. Jeong, J.h. Seo, Y.c. Kim, D.H. Seo, J.M. Baik, E.-c. Jeon*, G.s. Lee, H.s. Park, "Graphene Antiadhesion Layer for the Effective Peel-and-Pick Transfer of Metallic Electrodes toward Flexible Electronics", ACS Applied Materials & Interfaces, (2021).

31. J.-R. Lee, S.H. Moon, T.-J. Je, D.-S. Choi, H. Kim, E.-c. Jeon*, "Manufacture of microscale random pattern using indentation machining technology", International Journal of Precision Engineering and Manufacturing-Green Technology, (2020).

30. S.m. Hong, C.-S. Lee, M.-H. Lee, Y.d. Lee, K.Y. Ma, G.w. Kim, S.I. Yoon, K.w. Ihm, K.-J. Kim, T.J. Shin, S.W. Kim, E.-c. Jeon, H.s. Jeon, J.-Y. Kim, H.I. Lee, Z.h. Lee, A. Aleandro, R. Stephan, C. Manish, H.J. Shin, H.S. Shin, "Ultralow-dielectric-constant amorphous boron nitride", Nature, (2020).

29. D.w. Lee, J.h. Kim, E.j. Song, J.-Y. Jeong, E.-c. Jeon, P.h. Kim, W.h. Lee, "Micromirror-Embedded Coverslip Assembly for Bidirectional Microscopic Imaging", Micromachines, (2020).

28. J.-a. Kim, A. Kommajosula, Y.-h. Choi, J.-R. Lee, E.-c. Jeon, B. Ganapathysubramanian, W.h. Lee, "Inertial focusing in triangular microchannels with various apex angles", Biomicrofluidics, (2020).

27. S.y. Lee, J.s. Jang, T.j. Park, Y.M. Park, J.S. Park, Y.-K. Kim, H.-K. Lee, E.-c. Jeon, D.-K. Lee, B.m. Ahn, C.-H. Chung, "Electrodeposited Silver Nanowire Transparent Conducting Electrodes for Thin-Film Solar Cells", ACS applied materials & interfaces, (2020).

26. O.M. Kwon, J.h. Won, J.-h. Kim, C.h. Cho, E.-c. Jeon*, D.i. Kwon, "Effects of the Surface Contact on the Uncertainly in Indentation Yield Strength: Surface Roughness and Angular Misalignment", Metals and Materials International, (2019).

25. S.-Y. Lee, K.R. Park, S.-g. Kang, J.-H. Lee, E.c. Jeon, C.-H. Shim, J.-P. Ahn, D.-I. Kim, H.N. Han, Y.-C. Joo, C.s. Kim, I.-S. Choi, "Selective crack suppression during deformation in metal films on polymer substrates using electron beam irrradiation", Nature communications, (2019).

24. S.w. Shin, J.h. Kim, J.-R. Lee, E.-c. Jeon, T.-J. Je, W.h. Lee, Y.K. Park, "Enhancement of optical resolution in three dimensional refractive-index tomograms of biological samples by employing micromirror-embedded coverslips", Lab on a Chip, (2018).

23. J.-R. Lee, T.-J. Je, S.w. Woo, Y.-E. Yoo, J.-H. Jeong, E.-c. Jeon*, H. Kim, "Geometric and Wave Optic Features in the Optical Transmission Patterns of Injection-molded Mesoscale Pyramid Prism Patterned Plates", Current Optics and Photonics, (2018).

22. J.-a. Kim, J.-R. Lee, T.-J. Je, E.-c. Jeon*, W.h. Lee, "Size-Dependent Inertial Focusing Position Shift and Particle Separations in Triangular Microchannels", Analytical chemistry, (2018).

21. H.J. Lee, J.-R. Lee, S.H. Moon, T.-J. Je, E.-c. Jeon, K.y. Kim, Y.Y. Kim, "Off-centered Double-slit Metamaterial for Elastic Wave Polarizon Anomaly", Scientific reports, (2017).

20. K.-M. Lee, C.-V. Ngo, J.-Y. Jeong, E.-c. Jeon, T.-J. Je, D.-M. Chun, "Fabrication of an Anisotropic Superhydrophobic Polymer Surface Using Compression Molding and Dip Coating", Coatings, (2017).

19. D.-H. Choi, J.-R. Lee, N.-R. Kang, T.-J. Je, J.-Y. Kim, E.-c. Jeon*, "Study on ductile mode machining of single-crystal silicon by mechanical machining", International Journal of Machine Tools and Manufacture, (2017).

18. E.-c. Jeon*, J.-R. Lee, D.-H. Choi, H.-J. Choi, T.-J. Je, "A New Application of Dynamic Indentation: Indentation Machining Technology", Experimental Mechanics, (2017).

17. H.J. Choi, E.-c. Jeon, T.-J. Je, J.-H. Kim, D.-H. Choi, B.S. Shin, W.-C. Jung, Y.-H. Lee, "Ductile Mode Machining of the Micro Pattern Made on YSZ Using Ultra-precision Shaping with a Diamond Tool", Journal of the Korean Physial Society, (2015).

16. J.-R. Lee, E.-c. Jeon*, H. Kim, S.-W. Woo, T.-J. Je, Y.-E. Yoo, E.-S. Lee, "Optical Characterization and Manufacturing of an Optical Plate for Increasing Light Efficiency of LED Systems", International Journal of Precision Engineering and Manufacturing, (2015).

15. W.-B. Kim, E.s. Nam, B.-K. Min, D.-S. Choi, T.-J. Je, E.-c. Jeon, "Material Removal of Glass by Magnetorheological Fluid Jet", International Journal of Precision Engineering and Manufacturing, (2015).

14. C.s. Cho, S.j. Jeong, H.-J. Choi, N.r. Shin, B.S. Kim, E.-c. Jeon, J.-Y. Lee, "Toward Perfect Light Trapping in Thin-Film Photovoltaic Cells: Full Utilization of the Dual Characteristics of Light", Advanced Optical Materials, (2015).

13. E.-c. Jeon*, J.-R. Lee, T.-J. Je, D.-S. Choi, Y.-B. Ham, E.-S. Lee, S.-K. Choi, H. Kim, "Quantitative Analysis on Air-Dispensing Parameters for Manufacturing Dome Lenses of Chip-on-Board LED System", International journal of precision engineering and manufacturing, (2014).

12. J.g. Kim, T.-J. Je, S.-H. Cho, E.-c. Jeon, K.-H. Whang, "Micro-Cutting with Diamond Tool Micro-Patterned by Femtosecond Laser", International journal of precision engineering and manufacturing, (2014).

11. H.-J. Choi, S.j. Choi, Y.-E. Yoo, E.-c. Jeon, Y. Yi, S.w. Park, D.-S. Choi, H. Kim, "Transmission-type photonic crystal structures for color filters", Optics express, (2013).

10. E.-c. Jeon*, T.-J. Je, E.-S. Lee, E.-S. Park, J.-R. Lee, H.j. Choi, S.h. Chang, S.-K. Choi, "Optimization of Hybrid LED Package System for Energy Saving Based on Micro Machining Technology and Taguchi Method", International Journal of Precision Engineering and Manufacturing, (2013).

9. K.-H. Kim, Y.-C. Kim, E.-c. Jeon, D.i. Kwon, "Evaluation of indentation tensile properties of Ti alloys by considering plastic constraint effect", Materials Science and Engineering, (2011).

8. T.-J. Je, E.-c. Jeon, S.-C. Park, D.-S. Choi, K.-H. Whang, M.-C. Kang, "Improvement of machining quality of copper-plated roll mold by controlling temperature variation", Transactions of Nonferrous Metals Society of China, (2011).

7. E.-c. Jeon*, J.-S. Park, D.-S. Choi, K.-H. Kim, D.i. Kwon, "A Method for Estimating Uncertainly of Indentation Tensile Properties in Instrumented Indentation Test", Journal of engineering materials and technology, (2009).

6. H.W. Ro, K.h. Char, E.-c. Jeon, H.-J. Kim, D.i. Kwon, H.-J. Lee, J.-K. Lee, H.-W. Rhee, Christopher L. Soles, D.Y. Yoon, "High-Modulus Spin-On Organosilicate Glasses for Nanoporous Applications", Advanced Materials, (2007).

5. E.-c. Jeon*, J.-Y. Kim, M.-K. Baik, S.-H. Kim, J.-S. Park, D.i. Kwon, "Optimum definition of true strain beneath a spherical indenter for deriving indentation flow curves", Materials science and Engineering, (2006).

4. S.-H. Kim, E.-c. Jeon, D.i. Kwon, "Determining Brinell Hardness From Analysis of Indentation Load-Depth Curve Without Optical Measurement", J. Eng. Mater. Technol, (2005).

3. E.-c. Jeon*, M.K. Baik, S.H. Kim, B.W. Lee, D.i. Kwon, "Determining Representative Stress and Representative Strain in Deriving Indentation Flow Curves Based on Finite Element Analysis", Key Engineering Materials, (2005).

2. E.-c. Jeon*, J.-S. Park, D.i. Kwon, "Statistical Analysis of Experimental Parameters in Continusous Indentation Tests Using Taguchi Method", J. Eng. Mater., (2003).

1. J.-H. Ahn, E.-c. Jeon, Y. Choi, Y.-H. Lee, D.i. Kwon, "Derivation tensile flow properties of thin films using nanoindentation technique", Current applied physics, (2002).

<국내논문>

32. I.-H. Jo, S.-H. Lee, S.Y. Kim, M.-J. Kum, H.-I. Hwang, K.O. Kim, E.-c. Jeon, J.H. Kim, "A Study on the Effects of the Nano-/Micro-scale Machining Processing Characteristics on the Load Applied to a Metal Thin Film Surface", Journal of the Korean Society of Manufacturing Process Engineers, (2023).

31. H.-S. Lee, D.-H. Seo, H.H. Lee, J.H. Kim, E.-c. Jeon, "Analysis of the Correlation between the Theoretical and Measured Surface Roughness Values of Difficult-to-Cut Materials Subjected to Drilling", Jounal of the Korean Society of Manufacturing Process Engineers, (2023).

30. D.-H. Kim, J.-Y. Kwak, E.-c. Jeon, "Optimization of the Stretchability Evaluation Method of Stretchable Devices by Minimizing External Effects", Journal of the Korean Society of Manufacturing Process Engineers, (2022).

29. D.-H. Seo, Y.-P. Kwon, Y.-J. Kim, H.-J. Choi, E.-c. Jeon, "Effects of cutting Parameters on Surface Roughness in Planing Using Taguchi Method", Journal of the Korean Society of Manufacturing Process Engineers, (2021).

28. J.-Y. Kwak, J.-Y. Jeong, J.-A. Ju, Y.-P. Kwon, S.-H. Kim, D.-S. Choi, T.-J. Je, J.S. Han, E.-c. Jeon, "Evaluation of the Curvature Reliability of Polymer Flexible Meta Electronic Devices based on Variations of the Electrical Properties", Applied Chemistry for Engineering, (2021).

27. Y.-P. Kwon, S.-H. Kim, E.-c. Jeon, "Analysis of Variation of Specific Cutting Resistance in Nanoscale Cutting", Journal of the Korean Society of Manufacturing Process Engineers, (2020).

26. S.H. Moon, J.-Y. Jeong, J.-S. Han, D.-S. Choi, S.-D. Choi, E.-c. Jeon, T.-J. Je, "A study on size variation of quadrangular pyramid structure according to input voltage of solenoid indentation system", Journal of the Korea Society of Die & Mold Engineering, (2019).

25. E.-c. Jeon, Y.-H. Lee, T.-J. Je, "Analysis of Size Effect of Nano Scale Machining Based on Normal Stress and Indentation Theories", Journal of the Korean Society of Manufacturing Process Engineers, (2018).

24. J.-Y. Jeong, T.-J. Je, E.-c. Jeon, "Analysis of Mechanical Properties of Polymer Material for Clear Aligner using Uniaxial Tensile Test", Journal of the Korean Society of Manufacturing Process Engineers, (2018).

23. J.-R. Lee, S.H. Moon, T.-J. Je, J.-H. Jeong, H. Kim, E.-c. Jeon, "Realization of 3D Image on Metal Plate by Optimizing Machining Conditions of Ultra-Precision End-Milling", Journal of the Korean Society for Precision Engineering, (2016).

22. J.-Y. Jeong, T.-J. Je, S.H. Moon, J.-R. Lee, D.-H. Choi, M.-J. Kim, E.-c. Jeon, "Forming Properties of Micro Random Pattern Using Micro Abrasive Paper Tool by Roll to Plate Indentation Method", Journal of the Korean Society for Precision Engineering, (2016).

21. D.-H. Choi, E.-c. Jeon, M.-A. Yoon, K.-S. Kim, T.-J. Je, J.-H. Jeong, "Study on Ductile Machining Technology for Manufacturing Nano-Patterns on Single Crystal Silicon through Quantitative Analysis of Thrust Force", Journal of the Korean Society for Precision Engineering, (2016).

20. C.-E. Kim, E.-c. Jeon, T.-J. Je, M.C. Kang, "Machining Characteristics of Micro Structure using Single-Crystal Diamond Tool on Cu-plated Mold", Journal of Korean Powder Metallurgy Institute, (2015).

19. H.-H. Kim, E.-c. Jeon, D.-H. Choi, W.-K. Jang, Y.-M. Park, T.-J. Je, D.-S. Choi, B.-H. Kim, Y.-H. Seo, "A Study on Manufacturing Method of Nano-Micro Hybrid Pattern Using Indentation Machining Method and AAO Process", Journal of the Korean Society for Precision Engineering, (2015).

18. E.-c. Jeon, J.-H. Cha, J.-R. Lee, H.-J. Choi, C.-E. Kim, T.-J. Je, H. Kim, D.-S. Choi, "Machining of Specular Hologram using End-mill Technology", Journal of the Korean Society of Manufacturing Process Engineers, (2014).

17. W.-K. Jang, E.-c. Jeon, D.S. Choi, B.H. Kim, Y.H. Seo, "Fabrication of uniform micropattern arrays using nonionic surfactant-based wet etching process of high purity aluminum", Journal of the Korean Society of Manufacturing Process Engineers, (2014).

16. J.-R. Lee, E.-c. Jeon, T.-J. Je, S.W. Woo, D.-S. Choi, Y.-E. Yoo, H. Kim, "Fabrication and analysis of optical micro-pyramid array-patterns", Journal of the Korean Society of Manufacturing Process Engineers, (2014).

15. E.-c. Jeon, H.-J. Choi, K.-M. Lee, Y.-H. Lee, T.-J. Je, J.-H. Kim, D.-S. Choi, "Analysis on Specific Cutting Resistance Variation by Tool Angles Based on a Concept of Representative Stress", Journal of the Korean Society of Manufacturing Process Engineers, (2014).

14. H.-H. Kim, E.-c. Jeon, J.-H. Cha, J.-R. Lee, C.-E. Kim, H.-J. Choi, T.-J. Je, D.-S. Choi, "Development of Hybrid Machining System and Hybrid Process Technology for Ultra-fine Planing and Micro Punching", Journal of the Korean Society of Manufacturing Process Engineers, (2013).

13. H.-J. Choi, E.-S. Park, E.-c. Jeon, T.-J. Je, D.-S. Choi, "Analysis of Micro Machining Characteristics using End-milling and Its Applications", Journal of the Korean Society for Precision Engineering, (2012).

12. E.-S. Park, H.-J. Choi, H.-H. Kim, E.-c. Jeon, T.-J. Je, "Study on Machining High-Aspect Ratio Micro Barrier Rib Array Structures using Orthogonal Cutting Method", Journal of the Korean Society for Precision Engineering, (2012).

11. T.-J. Je, D.-S. Choi, E.-c. Jeon, E.-S. Park, H.-J. Choi, "Trends of Flat Mold Machining Technology with Micro Pattern", Journal of the Korean Society of Manufacturing Process Engineers, (2012).

10. E.-c. Jeon, J.-H. Kim, T.-J. Je, "Prediction of State of Cutting Surfaces of Polymers by Analysis of Indentation Load-depth Curve", Journal of the Korean Society of Manufacturing Process Engineers, (2011).

9. E.-c. Jeon, T.-J. Je, S.h. Chang, "Development of machining technology for non-continuous pattern removing plastic deformation around pattern", Journal of the Korean Society of Manufacturing Process Engineers, (2010).

8. E.-c. Jeon, T.J. Je, K.H. Whang, "A Study on Design of High Luminance Hybrid LED Package and Ultra-fine Machining of Optical Pattern", Transactions of Materials Processing, (2010).

7. Y.-M. Lee, J.H. Lee, E.-c. Jeon, "A Study on an Integrated Light Guide Plate", Korean Journal of Optics and Photonics, (2010).

6. E.-c. Jeon, S.-H. Kim, J.-S. Park, Y.-J. Yu, D.i. Kwon, "Evaluation of Indentation Tensile Properties for FCC Linear Hardening Materials", Journal-Korean Institute of Metals and Materials, (2006).

5. D.i. Kwon, S.-H. Kim, J.-Y. Kim, E.-c. Jeon, J.-S. Lee, K.-H. Kim, "Application & Standardization of Instrumented Indentation Technique for Characterizing Material Properties", Journal-Korean Institute of Metals and Materials, (2005).

4. E.-c. Jeon, M.-K. Baik, S.-H. Kim, J.-S. Park, D.i. Kwon, "Study for True Strain Definition of Indentation Flow Curve Derivation", Journal-Korean Institute of Metals and Materials, (2004).

3. E.-c. Jeon, J.-S. Park, D.i. Kwon, "The Optimization of Experimental Conditions of Continuous Indentation Test for Tensile Properties Evaluation", Journal-Korean Institute of Metals and Materials, (2003).

2. E.-c. Jeon, D.i. Kwon, Y. Choi, J.-i. Jang, "Nondestructive Advanced Indentation Technique: The Application Study from Industrial Structure to Nanomaterial", Journal of the Korean Society for Nondestructive Testing, (2002).

1. E.-c. Jeon, J.-H. Ahn, D.i. Kwon, "Evaluation of Work-hardening Exponent by Quantitative Analysis of Load-depth Curves", Journal-Korean Institute of Metals and Materials, (2001).